Product ID:0670 MOTOR OIL SAE 15W-40, 647 0670
MSDS Date:07/15/1988
FSC:9150
NIIN:00N055598
MSDS Number: BWBLY

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 814-368-6111

Cage: 6Z384

Telephone: 814-368-6111

Cage: 75273

PETROLEUM HYDROCARBON PLUS ADDITIVES

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE TOXICOLOGICAL PROPERTIES: NO
DATA AVAILABLE. CHRONIC: PROLONGED OR REPEATED SKIN CONTACT MAY
CAUSE DERMATITIS (SKIN IRRITATION).
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: IMMEDIATELY FLUSH WITH LARGE QUANTITIES OF WATER FOR AT
LEAST 15 MINUTES & CALL MD. SKIN: REMOVE EXCESS WITH CLOTH OR
PAPER. WASH THOROUGHLY WITH SOAP & WATER. INHALATION: REMOVE TO
FRESH AIR. C ALL MD. INGESTION: CONTACT MD IMMEDIATELY.

Flash Point Method:COC
Flash Point:>401F,>205C
Extinguishing Media:DRY CHEMICAL OR WATERFOG OR CARBON DIOXIDE OR FOAM.
CLOSED CONTAINERS EXPOSED TO FIRE MAY BE COOLED WITH WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER EXCEPT AS FOG.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:TRANSFER BULK OF MIXTURE INTO ANOTHER
CONTAINER. ABSORB RESIDUE WITH AN INERT MATERIAL SUCH AS EARTH,
SAND OR VERMICULITE. SWEEP UP AND DISPOSE AS SOLID WASTE IN
ACCORDANCE WITH LOCAL, STATE AND FEDER AL REGULATIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT HANDLE OR STORE AT TEMPERATURES
OVER 38C (100F).
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
VAPOR CARTRIDGE IF VAPOR CONCENTRATION EXCEEDS PERMISSIBLE EXPOSURE
LIMIT.
Ventilation:LOCAL IF NECESSARY TO MAINTAIN ALLOWABLE PEL OR TLV.
Protective Gloves:NEOPRENE TYPE.
Eye Protection:ANSI APPROVD CHEM WORKER GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:V6
Boiling Pt:B.P. Text:>626F,>330C
Melt/Freeze Pt:M.P/F.P Text:-22F,-30C
Vapor Pres:0 @ 20C
Vapor Density:NOT VOLAT
Spec Gravity:SUPDAT
Evaporation Rate & Reference:0
Solubility in Water:0 AT 20C (BY WT %)
Appearance and Odor:BROWN LIQUID; MOTOR OIL ODOR.
Percent Volatiles by Volume:0 (WT)

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS HYDROGEN PEROXIDE, BROMINE AND CHROMIC ACID.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE & CARBON DIOXIDE FROM
BURNING. OXIDES OF PHOSPHORUS FROM BURNING. OXIDES OF SULFUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.